More RPi Words of the Wise!

Wow!  The posts are really flying today!  However, this is important.  If you have gotten NOOBS up and running and have installed Raspbian, you still may not be ready to roll.  I could not get Raspbian to show up at all, and so I started troubleshooting.  Although I would have liked to shoot my trouble with a .22-gauge shotgun, I was mature and instead looked up some stuff on the Information Superhighway.  My solution to Raspbian not displaying on my old composite video TV was to, in NOOBS, edit the "config.txt" file for Raspbian so that all the auto-generated settings at the bottom of the page were commented out.  Basically, to make Raspbian display on my TV, I commented out every line in the file.  It worked!  Time to set up WiFi!

NOOBS Display Output

OK, so if you are going about on your first time running the Raspberry Pi NOOBS SD card, don't freak out when you don't see anything on the screen.  If you have the RPi plugged in, methodically go through pressing 1, 2, 3, and 4 on your keyboard, one after the other, until you see something.  I got ready to "broaden my vocabulary" when my RPi seemed to be haywire again; save yourselves the trouble by changing the display output to conform to your display/TV by pressing 1 through 4 on your keyboard.  After doing so, you will see a very nice interface!  Yay!

RPi SD Cards

Well, technology once again drives me to pulling my hair out!  I tried to redo my SD card since it self destructed, but the computer said it was "Read Only."  Nothing more, and no options to change it.  Therefore, I came across some weird stuff on the Internet that sounds slightly superstitious.  If one pushes, pulls, and presses on the SD card the right way when it is in the slot, all the problems go away and the SD card is writeable again!  It actually works!  As such, I have the NOOBS Raspberry Pi software installing Raspbian as I write this post!  Hopefully this helps for all those annoying SD cards!

200 Folding@Home WUs!

I just finished my 200th work unit for Folding@Home!  For those of you who don't know, Folding@Home is a distributed computing project on protein folding, dedicated to helping scientists understand diseases such as Alzheimer's and cancer.  And today, my trusty computer, "FrankenBox I", just finished its 200th work unit, with a score of 621295 and a rank of 46952 out of 1708587 users!  That comes out to a percentage of 2.74%.  I am in the top 2.75% of all Folding@Home users!  In short, I am very happy and am already (when am I not?) scheming for ways to get more computers and do more folding!

RPi Battery Pack at Last!

Well, it's been a while since I have posted, because... actually, I don't know.  But, while traversing the Great Information Superhighway, I stumbled upon this amazing article on powering a Raspberry Pi off 8 AA batteries and a 12V car-to-USB adapter.  Since I had the materials and have wanted to get a battery pack set up for various projects, I tried the idea.  My Raspberry Pi was not functional, however, as it had somehow self-destructed its memory card again and had weird errors that I couldn't make heads or tails of.  After playing around with the car charger, I discovered that the polarity of the leads connecting to the tabs of the charger does matter.  I tried testing for voltage on the USB end of the charger, and something started smoking and smelling bad.  Then, I noticed that my clip lead had come undone, because it had melted!  After reversing polarity, I got the whole thing working!

I was able to power a USB keyboard light using my hack.  As you can see in the image, I have a four-pack of AAs, a two-pack, and another two-pack, all in series.  The clip leads connect to the tabs of the 12V car-to-USB charger, and then the USB light is plugged into that.  Next, I need to figure out my misbehaving Raspberry Pi and try this battery pack!

Scratch: The Future of Technology

Well, it might not quite be the future of technology, but it is pretty cool.  Check out Scratch!  The interactive, colorful, and easy programming language.  And Scratch 2.0 is coming soon, so take a look at my new project I made for computer club!  Also, go to beta.scratch.mit.edu to try out their new web interface!  No download needed!

Extreme Tech Fun!

Well, if I wasn't a tech already, I'm definitely heading down that slippery slope now!  Just recently, I got a recommendation from a friend to get VirtualBox, an awesomely powerful virtual machine suite.  I got it and  installed Debian 6.0.6 and Ubuntu 12.04 on virtual hard drives.  Then, for some extremely geeky fun, I played around with SSH on the virtual machines.  I had to configure the virtual network settings a bit, but that was pretty easy.  I SSHed as root into the Debian machine, which was already running a web server, then was able to play around with my knowledge of Unix and command-line operation.  I used the super-cool command-line tool nano to edit the index.html file of the /var/www folder.  Then, on my Windows 7 OS, I was able to view the website without any difficulty!  Should you ever feel the need to play around with SSH, Unix-based systems have it built in, and on Windows, you can download the program PuTTY, which is a standalone SSH client.  Have fun!

Educational Password Cracker!

It all started like this.  I got bored, couldn't think of a program to write, and so I decided to write a purely educational password cracker.  First, I made a ridiculously simple password generator algorithm that wrote all the four-character combinations of the numbers and letters to a file.  Then, I created another program that takes your MD5 password hash and set it to a variable.  It then reads a line from the file, hashes it, and compares it with your hash.  If they are the same, it tells you what the line from the file (the password) was.  If not, it reads the next line and does the process all over again.  Somehow, I just can't believe how simple that was.  And it works beautifully!  Check out the app development section to get the program and take over the world!

Extreme Amazement

I like intricate and unique Lego machines, and this one is definitely no exception!  Inspirational, awe-inspiring, and bonkers fail to describe this one-of-a-kind contraption.

Flying Cars!

Well, I was learning about Nate Saint and found out that his son, Steve Saint, builds flying cars for missionaries.  Check out the video!
Also, please pray for him as he was partially paralyzed while operating his new machine.